Occasions difficult to solve small space requirements can not be reached, you can tailor highly efficient delivery platform, products hydraulic system settings anti-dropping, interactive chain on the lower door, lifts to all floors and countertops can be set to operate buttons, multi-point control. Room Products sturdy structure, carrying capacity, smooth movements, easy installation and maintenance, is economical and practical alternative to lift the lower floors ideal cargo transportation equipment. Depending on the installation environment and use requirements lifts choose a different configuration options, you can achieve better results, the products are mainly used in chemical, high temperature, high pressure, power plants, nuclear industrial base, explosives and other explosion-proof business.
Maximum load 30 tons, multi-point control, interactive interlocking upper and lower floors, reaching the safe use; high lifting height, using the next set cylinder, or dual measurement type cylinder, smooth operation, no noise, easy maintenance, long service life; blackout manually drop the emergency stop button, convenient, fast and practical; pit depth is generally 15cm-30cm, the height of the top unrestricted environment can be customized according to the site with; layer door can link up, poke each other inside and outside the plant can open, convenient, save space; particularly suitable for 2-3 layers of steel plant, can be used inside and outside; imported pumping station pumping station, if the speed is too high, the use of imported custom station, to achieve the desired delivery requirements, cylinder and seals imported parts, resolve customer hydraulic instability, parts oil leakage, electrical parts optional (Shanghai People Electric, Schneider, Siemens)
Hydraulic cargo lift safety device in the same time with the traditional traction elevator, also features: relief valve: prevents the upward movement when the system pressure is too high, emergency manual valve: When the power fails, can the car down to the nearest emergency the floor location of the door, hand pump: When the system fails, steerable manual pump high-pressure oil hit the car up to the nearest floor location; hose rupture valve: when the hydraulic system piping rupture car stall decline can automatically cut off the oil stopped declining. Oil tank protection: When the oil temperature in the tank exceeds the standard setting, the oil temperature protection device generating signal, pause elevator use, when the oil temperature dropped before starting the lift.
Low cost
Failure rate: the use of advanced hydraulic system, and there is good control, elevator lowest failure rate may be approaching. Less power consumption: hydraulic elevator down, pressure generated by gravity-driven, substantial energy savings.
Civil engineering advantages:
1, the top of the hoistway without machine room, top floor height of 3.5 m or more to install.
2, room can be set within a range of 15 m radius of the well, and occupies an area of only 3-4 square feet.
3, the hydraulic elevator counterweight is not set to improve the hoist way area utilization.
4, the hydraulic elevator load, load through the cylinder direct role in the pit, hoist way strength requirements low, brick or masonry structure hoist way can.
Safety and stability advantages
A relief valve: When the system pressure is too high to prevent the upward movement
2, the emergency manual valve: When the power fails, the car can drop to the nearest emergency floor open position,
3, hand pump: When the system fails, steerable manual pump high-pressure oil hit the car up to the nearest floor location;
5, oil tank protection: When the oil temperature in the tank exceeds the standard setting, the oil temperature protection device generating signal, pause elevator use, when the oil temperature dropped before starting the lift.
Operating cost advantage
A low failure rate: the use of advanced hydraulic system, and there is good control, elevator lowest failure rate may be approaching.
2, less power consumption: when the hydraulic lift down, driven by the pressure generated by the weight of a substantial energy saving.
hydraulic guide rail lift when used in their daily lives to pay attention to maintenance, extend its life. Learn Maintenance Problems mechanical devices:
Brakes 1. Each institution should always be checked and gap adjustment wheel brake shoes and brake, to ensure flexible and reliable. In the friction surface, there should be no dirt exists in case of dirt must be washed off with gasoline or thinners.
2. The gear box, transmission, gear and other parts of the external lubrication and hydraulic oil according to the lubrication requirements of the table.
3. To pay attention to check whether the ministries broken wires and loose rope shares phenomenon. If it exceeds the relevant provisions must be renewed immediately. Wire rope maintenance should be in strict accordance with GB5144-85 regulations.
4. Always check the connections ministries, if loose and should be tightened. Body should check the tightness of bolts (can swivel arm methods to create a compressed state) in the body under pressure, all connections slightly axes must have a cotter pin, and the need to open fully.
5. Always check the agencies functioning properly, with or without noise, if found faulty and must be immediately removed.
6. installation, removal and adjustment of the rotation mechanism, should be taken to ensure the centerline of rotation mechanism with a gear reducer centerline parallel to its engaging surface is not less than 70%, meshing clearance to fit.
7. Always check all the wires, cables for damage. To timely dressing and replacement part to injury.
8. encountered motor has overheated to promptly stop, troubleshooting and then continue to run the motor bearing lubrication to be good.
9. Each part of the brush, the contact surfaces should be kept clean, adjust the brush pressure, so that the contact area of not less than 50%.
10. Each control box, power distribution boxes kept clean, timely cleaning dust on electrical equipment.
Contact Us
Jinan Sinicmech Machinery (MORN GROUP) Co., Ltd
NO.15612 Century Avenue, High-Tech Zone, Jinan, China.
Tel: +86-531-55572832
Fax: +86-531-88692337
Email: sa@mornlift.com sa@sinicmech.com
Skype: sa.sinicmech.com
没有评论:
发表评论